4 1/2 Casing

Posted on by admin

Designer Casing Primed MDF 3/4' x 4 1/2' in 8 foot lengths, can be ordered in 16ft. 4 1/2 12.75 N-80 EUE 4 1/2 11.60 P110 LTC 4 1/2 13.50 P110 LTC 5 1/2 17# P110 LTC 7' 26# P110 LTC 7' 29# P110 LTC 7' 32# P110 LTC 8 5/8 32# P110 LTC 9 5/8 47# N-80 BTC 13 3/8 68# N-80 BTC: Author: Carwin Slade Need 7' 20# and 5 1/2' 15.5# oil well casing quantity is not an issue, will take what you have. Author: Wade Phillips.


4 1 4 Door Casing

1SUPERMAX is tubing connection with avaiable size range from 1.900' to 4-1/2'

2SUPERMAX2 is casing connection with avaiable size range from 5' to 13-3/8 '

3Design concept for SUPERMAX and SUPERMAX2

  1. Threaded and coupled connection applied on non-upset plain end
  2. Thread seal connection with unique thread form And thread engagement
  3. Run-out thread with thread form:
    2° Load flank For high joint strength
    45° Stabbing flank For easy stabbing
  4. Taper: 1/16
  5. Thread pitch: 8TPI SUPERMAX : 8 TPI, SUPERMAX2 : 5 TPI
  6. Pin: Bare
    Coupling: Phosphated

4SUPERMAX Tubing

Capacity Of 4 1/2 Casing

4.1 Feature of SUPERMAX Tubing

SUPERMAX IS LOW COST ALTERNATIVE TO EUE

  • Non-upset tubing: SUPERMAX is threaded and coupled type connection which eliminates upsetting and normalizing processes from manufacturing cycle
  • Easy threading: Short length thread, easy machining and repair provided by patented thread form.
  • Cheaper accessories: Pup joints, cross-overs at a fraction of the cost compared to EUE.
  • Extended product life: Elimination of upset ends does not limit number of repairs.
  • Small coupling OD: Allows use of larger OD tubing than EUE, which improves production of oil & gas and reduces friction loss during well stimulation.
  • Resistance to galling: Provides multiple make and break capabilities
4.2 Applications

Some of the potential applications of SUPERMAX are as follows:

  • Production tubing where API EUE tubing is normally specified.
  • Low-pressure gas-well applications where premium connections are currently being used.
  • Tubing for high-pressure fracturing jobs.
  • Tubing for thermal applications.
  • Clearance programs where smaller OD than API EUE is desired but joint strength must be higher than API EUE.
  • Reclamation of API EUE tubing with insufficient upset length
4.3 Options
4 1 4 door casing
  • Internal plastic coating and glass-fiber lining available.
    Special clearance coupling and/or 20° bevel are available.

5SUPERMAX2 Casing

5.1 Feature of SUPERMAX2 casing

As well known, API round thread has good sealability but low joint strength, but on the other hand API Buttress thread has high joint strength but poor leak resistance.
SUPERMAX2 has joint strength as high as API buttress thread, and has leak resistance as good as API round thread.

5.2 Application

Frac. Job through casing, especially deep wells or high temperature wells which require high joint strength on casing.

6Modified Coupling with Non-metallic seal

Modified coupling with non-metallic resilient seal to enhance gas sealability for SUPERMAX and SUPERMAX2 is available.

2 1 4 Door Casing

To view a PDF file, you need Adobe Reader.
If you don't have it, you can install it here.